Welcome to My Bidets shop
Toto Installation

 

Toto Bidet Installation

bidet,bathroom accessories, bathroom, fixtures, plumbing supplies, toilet

Installation is accomplished by installing a simple 3 way valve that is supplied with every unit. Adapters are included for either pipe thread or copper soldered fittings. The spray unit can be installed on the left or the right side of the toilet.

Your Sanicare unit will provide health benefits to the user at a cost so reasonable you'll wonder why you didn't treat yourself and your family sooner to better personal hygiene and an array of other benefits. You will want one for every bathroom in the house.

bidet,bathroom accessories, bathroom, fixtures, plumbing supplies, toilet

INSTALLATION
1. Install in wall a half-inch diameter, inner-thread pipe, about 10 cm. above floor.
2. Allow water to flow through pipe prior to installation of the valve for easy installation and maintenance.
3. Attach the hose to valve by placing the rubber gasket between the nut and the valve. Tighten well.
4. Attach the hose to rinsing spray body.
5. Using the fastening set, insert the hanger at a height of about 65-70 cm. above the floor, making sure that the hose does not drag on the floor.
6. Test the rinsing spray by pressing the water control plate.

bidet,bathroom accessories, bathroom, fixtures, plumbing supplies, toilet

USAGE SPECIFICATION
1. Water pressure should be between 0.05-0.30 Mpa (0.5-3.0 Kgf/cm2).
2. In case of water pressure is over 2 Kgf/cm2, a valve should be fitted between the water supply pipe and the wash-hose to control the water flow as mounted and also for easy maintenance.
3. Do not use toilet cleaners with hydrochloric acid content.
4. Do not use hard brush or steel wool for cleaning. Soft cloth or sponge is recommended to prevent scratch marks.
5. When tools are required for working with sanitary fittings, use thick cloth to prevent scratch marks.

• Easy to install using regular hand tools:
It's tough unibody construction easily installs on most toilets and connects to all standard plumbing fixtures.
• Connects directly from the fresh water line to the toilet. And no costly plumbing alterations, pump or electrical supply is needed.
• Can be installed on either side of the toilet for easy right or left-hand operation.
• Becomes part of the toilet system and does not take up space the way expensive
plumbing fixtures do.
• By varying the pressure on the spray unit lever, the user can regulate the flow of water.
• The small spray unit and the flexible hose make it possible to direct the spray to the
exact area where it is needed.
• Beautifully constructed...years of trouble free service.

 

    sales@mybidets.com  
© 2009 My Bidets Shop :: Bidet History :: Toilet Features my bidets banner contact my bidets